3-1
Overview
The control panel on the 4021M-32R has several LEDs and two buttons. There
are also two LEDs on each SAS drive carrier. These LEDs keep you constantly
informed of the overall status of the system and the activity and health of specifi c
components.
3-2
Control Panel Buttons
There are two push-buttons located on the front of the chassis: a power on/off
button and a reset button.
POWER: This is the main power button, which is used to apply or turn off
the main system power. Turning off system power with this button removes the
main power but keeps standby power supplied to the system.
RESET: Use the reset button to reboot the system.
Chapter 3
System Interface
3-1
Chapter 3: System Interface