Supero AS-4021M-32R User Manual page 69

Figure 6-5. Removing a SAS Drive Carrier
Figure 6-6. Mounting a SAS Drive in a Carrier
Important! Use extreme caution when working around the SAS
backplane. Do not touch the backplane with any metal objects
!
and make sure no ribbon cables touch the backplane or obstruct
the airfl ow holes.
3. SAS backplane
The SAS drives plug into a SAS backplane. Two iPass cables (CBL-0119L-02)
need to be connected from the serverboard to the appropriate connectors on the
backplane to support the eight SAS six drives. You cannot cascade the SAS
backplane.
Chapter 6: Advanced Chassis Setup
6-7