Cdx2 Connections - NAIM CD 2006 Manual

C DX2
10 CDX2 Intr oduction and Inst allat io n
The CDX2 CD Player can be operated either from its internal power supply or, for
improved performance, from an external naim CD 555Ps or XPs Power supply.
Connection of the XPs Power supply is illustrated in Diagram 11.2. CD player control and
operation is described in sections 19, 20 and 21.
The CDX2 should be installed on a dedicated equipment stand intended for the purpose.
To improve sound quality the player has hard metallic feet which may blemish any
delicate surface on which it is placed. Do not stand the player directly on top of another
item of naim audio equipment. Care should be taken to ensure that the player is level.
a transit screw on the underside of the CDX2 should be removed before use and must
be replaced if the unit is to be moved or re-packed and shipped. The transit screw must
not be used in any other naim product. Do not invert the player once the transit screw is
removed.
The player (and external power supply if used) should be installed in its final location
before connecting cables or switching on. ensure that power amplifiers are switched off
and the preamplifier volume is turned down before the player (or external power supply)
is switched on. The player power button is located on the rear panel. Power supply power
buttons are located on their front panels.
The player and power supply are heavy and care should be taken when lifting or moving
them. make sure that the surface on which they are to be placed can support their
weight.

11 CDX2 Connections

11 . 1 re ar Pa n el
Power
Mains in-
switch
put and
fuse
Comms RC5 input
interface
notes
The power supply link plug should be fitted unless an
external upgrade power supply is in use.
The RC5 Input is intended to accept external control
signals for multi-room applications. Contact your dealer or
Naim Audio directly for further information.
The optional RJ45 socket Comms Interface can provide
external control of the player in custom installations.
Contact your dealer or Naim Audio directly for further
information.
Phono
Upgrade power
supply input output
left
(link plug fitted)
DIN output
Phono
output
right
CDX2
DIn output
nc
nc
ch1
ch2
-ve
9