Advertisement
Additional safety features
1. Overheating protection: a safety device switches the fan heater off if it accidentally overheats
(e.g. air intake and outlet grilles obstructed, motor not turning or turning slowly). To restore nor-
mal operation, remove the plug from the power outlet and leave it unplugged for a few minutes,
eliminate the cause of overheating, then plug the fan heater back in again.
2. Tip over safety switch: a safety tip-over switch turns the fan heater off if it tips over or is positio-
ned in an improper way that could jeopardize safety.
Note: To avoid overheating the appliance, do not cover it.
TROUBLE-SHOOTING
If the appliance shuts off unexpectedly:
-
Check that the appliance is receiving power.
-
Check that the appliance is in the vertical position and on a flat surface, as the safety tip-
over switch may have been tripped.
-
Check the temperature set and the timer.
The appliance may be off because the set temperature has been reached or the time set on
the timer has elapsed.
7
Advertisement
