Setting The Tv On The Wall - HANNspree ST551MUB User Manual

7

Setting the TV on the Wall

Dissembling the stand base:
1 Disconnect all the cables and cords from the TV to prevent breakage.
2 Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth,
etc) to prevent any damage to the TV.
3 Remove the six (6) screws so that the stand base can be removed.
4 Gently remove the stand base.
5 Please add rubber cover when this TV is mounted on the wall.
Wall mounting the TV:
1 Purchase a VESA compatible wall bracket:
VESA 400 X 400, 4 holes, M6, 20 mm, 30kg.
2 Locate your ideal TV position on the wall.
3 Fix the wall bracket firmly on the wall.
4 Secure the TV to the bracket using the 4 mount
holes on the back and center of the TV.
Note:
• Please read the instructions of your specific wall bracket to properly wall mount
the TV.
• The pitch of the mounting holes is 200mm horizontally and 200mm vertically.
• The screws type required is metric: M6, 20mm length.
• The 55" TV stand base can be screwed on a table or a hard surface using the
hole on the back of the stand base. Nevertheless, it's recommended to mount
your TV on the concrete wall.
*Installing the LCD TV requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. please contact with
Hannspree dealers in wall mount bracket. You can ask a qualified service personnel about
using an optional bracket to mount the TV to the wall. Please add rubber cover when this TV is
mounted on the wall.
Equipment to be used with for open site.
52
( For reference only )