Hot Water Production - DeLonghi EC710 Instructions Manual

2. With one hand, hold the cappuccino tube firmly and with the
3. Remove the nozzle from the steam tube by pulling it downwards
4. Wash the cappuccino maker and steam nozzle thoroughly with
5. Make sure the two holes indicated by the arrows in fig. 25 are not
fig. 23
6. Replace the steam nozzle by inserting it onto the steam tube and
7. Replace the cappuccino maker by inserting it and rotating anti-

HOT WATER PRODUCTION

1. Turn the appliance on by pressing the ON/OFF button (fig. 3).Wait
2. Place a container under the cappuccino maker.
fig. 24
3. Press the coffee button (fig. 6) and at the same time open the
4. To interrupt the flow of hot water, close the steam knob by rotating
fig. 25
Coffee Maker
other unscrew the cappuccino maker itself by rotating clockwise
and extracting downwards (fig. 23).
(fig. 24). Note: Metal of steam pipe may be hot!!!
warm water.
blocked. If necessary, clean with a pin.
rotating firmly towards the top of the tube.
clockwise.
until the OK indicator light comes on (fig. 5).
steam knob. Hot water is delivered from the cappuccino maker.
clockwise and press the coffee button again.
8