Following Your Route; Adding A Via Point; Taking A Detour; Stopping The Route - Kenwood DNX6160 Gps Navigation Instruction Manual

Find It and Go!

Following Your Route

Your route is marked with a magenta line. As you
travel, your navigation system guides you to your
destination with voice prompts, arrows on the
map, and directions at the top of the map. The
upper-left corner indicates the distance to your
next maneuver. If you depart from the original
route, your navigation system recalculates the
route and provides new directions.
Your route is marked with a highlighted line.
Follow the arrows.
A checkered flag marks your destination.
⁄
• 3D buildings may appear in some areas on the map
(DNX9960 only).
12 GPS Navigation System Instruction Manual
190-01141-90_0A.indb 12 190-01141-90_0A.indb 12

Adding a Via Point

You can add a stop (Via Point) to your route. The
navigation system gives you directions to the
stop and to your final destination.
1 With a route active, touch
Where To?.
2 Search for the extra stop.
3 Touch Go!.
4 Touch Add As a Via Point to add this stop
before your destination.
If you want to add more than one stop to the
route, edit the current route. See page 19.

Taking a Detour

If a road on your route is closed, you can take a
detour.
1 With a route active, touch
2 Touch Detour.
The navigation system attempts to get you back
on your original route as quickly as possible. If
the route you are currently taking is the only
reasonable option, the navigation system might
not calculate a detour.

Stopping the Route

1 With a route active, touch
2 Touch Stop.
(back icon) >
.
.
12/1/2009 2:21:22 PM 12/1/2009 2:21:22 PM