Bios Defaults - Dell R5400 - Precision - 1 GB RAM Technical Manual

Dell Precision R5400 Workstation/FX100 Technical Guide

BIOS Defaults

System Info Lists the computer name, BIOS version, service tag, express service code, asset tag, and ownership tag.
None of these fields are changeable.
Processor Info Identifies the processors' type, clock speed, bus speed, L2 cache, processor ID, microcode version, multi
core capability, HT capability, and 64-bit technology
Memory Info Indicates the amount of installed memory, memory speed, channel mode (single, dual, or quad), and memory
technology. Each slot is also identified by calling out the amount and type of memory populated.
PCI Info Displays what (if anything) is inserted into each PCI slot.
Date/Time Displays and controls the current date and time settings. Changes take effect immediately.
Boot The computer attempts to boot from the sequence of devices specified in this list. Default Setting:
Sequence






Diskette Drive
NOTE:
Regardless of what the System Setup shows, the system does not have the option to ship with a floppy
drive.
This field determines how the BIOS configures floppy drives. Operation Systems with USB support will
recognize floppy drives regardless of this setting.


NOTE: The USB Controller setup option will affect floppy operation.
Default setting: On
SATA-0 This field allows the user to enable or disable a SATA device.
Default setting: On
Onboard or USB Floppy Drive
Onboard SATA Hard Drive
Onboard IDE Hard Drive
Any add-in hard disks that are detected (listed in the order that they are detected w/ USB Device
usually being detected last)
Onboard or USB CD-ROM Drive
Any other bootable add-in devices that are detected (listed in the order that they are detected w/
Onboard Network Controller usually being detected first)
Off Floppy drives are disabled
On Floppy drives are enabled
D E L L P R E C I S I O N W O R K S T A T I O N S – D O N ' T S E T T L E F O R A N Y T H I N G L E S S
Drives
A D # 8 1 0 0 0 2 0 0 8
P 2 8 3 6
A G E O F