Dell OptiPlex XE Installing Manual page 10

Installing your dell™ optiplex™ xe in an ingress protection 51 (ip51) kit

Hide thumbs Also See for OptiPlex XE:

Cleaning the Dust Filter on the IP51 Kit

The IP51 kit has removable dust filters on front and back panels to prevent

dust from entering the computer. It is recommended that you regularly clean the

dust filters using a wet towel, a soft brush, or a vacuum cleaner.

CAUTION:

Do not use a hard brush or any other hard material to clean the dust filters.

front panel dust filter

back panel dust filter

____________________

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is

strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and OptiPlex are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the

marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade

names other than its own.