Table of Contents
Advertisement
Table 1-5. Technical Specifications (continued)
Internally accessible:
1
EIDE drive
. . . . . . . . . . .
2
Diskette drive
. . . . . . . . .
<Ctrl><Alt><Del> . . . . . . . .
<Ctrl><Alt><Enter> . . . . . . .
Power control . . . . . . . . . . . .
Power indicator . . . . . . . . . . .
Hard-disk drive access
indicator . . . . . . . . . . . . . . . .
Link integrity indicator
(on connector for optional NIC)
Activity indicator
(on connector for optional NIC)
Power supply wattage . . . . . .
Power-supply heat
dissipation . . . . . . . . . . . . . . .
Power supply voltage . . . . . .
Backup battery . . . . . . . . . . .
Height . . . . . . . . . . . . . . . . . .
Width. . . . . . . . . . . . . . . . . . .
Depth. . . . . . . . . . . . . . . . . . .
Weight . . . . . . . . . . . . . . . . . .
1
Although the system board provides support for four EIDE devices, the power supply supports only
the internal hard-disk drive.
2
An external diskette drive kit is available for diagnostics and troubleshooting purposes only.
Ports (continued)
two 40-pin connectors on PCI local bus
34-pin connector
Key Combinations
restarts (reboots) the computer
starts System Setup program (during POST
only)
Controls and Indicators
push button
green LED
green LED
green LED
yellow LED
Power
80 W
400 BTU/hr (nominal) without monitor
90 to 135 V at 60 Hz; 180 to 265 V at 50 Hz
3-V CR2032 coin cell
Physical
9.27 cm (3.65 inches)
33.71 cm (13.27 inches)
34.93 cm (13.75 inches)
5.9 kg (13 lb)
System Overview
1-17
Advertisement
Table of Contents
