Log Tab; Saving And Printing Information In Hp Insight Diagnostics - Compaq dx2355 - Microtower PC Troubleshooting Manual

Log Tab

Saving and Printing Information in HP Insight Diagnostics

✎
Troubleshooting Guide
The Log tab contains two logs, a Test Log and an Error Log, each of
which can be selected from the left side of the tab.
The Test Log displays all tests that have been executed, the number of
times of execution, the number of times the test failed, and the time it
took to complete the test. The Clear Test Log button will clear the
contents of the Test Log.
The Error Log displays the tests for devices that have failed during
the diagnostic testing and includes the following columns of
information.
■
The Description section describes the error that the diagnostic
test found.
■
The Recommended Repair will give a recommended action that
should be performed to resolve the failed hardware.
■
The Failed Count is the number of times the test has failed.
■
The Error Code provides a numerical code for the failure. The
error codes are defined in the Help tab.
■
The Clear Error Log button will clear the contents of the Error Log.
You can save the information displayed in the HP Insight Diagnostics
Status and Log tabs to a diskette or a USB 2.0 HP Drive Key (64MB
or higher). You can not save to the hard drive. The system will
automatically create an html file that has the same appearance as the
information displayed on the screen.
1. Insert a diskette or USB 2.0 HP Drive Key (capacity must be
64MB or higher). USB 1.0 Drive Keys are not supported.
2. Click Save in the upper right corner of the tab.
3. Select Save to the floppy or Save to USB key.
4. Enter a file name in the File Name box and click the Save button.
An html file will be saved to the inserted diskette or USB HP
Drive Key.
Do not remove the diskette or USB key until you see a message
indicating that the html file has been written to the media.
www.hp.com
Computer Diagnostic Features
1–6