Chapter 3 Remote Management Console - Compaq DS10L - AlphaServer - 256 MB RAM Reference Manual

Remote Management Console
The remote management console (RMC) provides a command-line user interface
for entering commands to monitor and control the system. In addition to doing
routine monitoring, you can invoke the command-line interface to perform
remote power on/off, halt, and reset.
The RMC can detect alert conditions such as overtemperature, fan failure, and
power supply failure and automatically dial a pager phone number or another
computer system to notify the remote operator of the alert condition.
This chapter explains the operation and use of the RMC. Sections are:
RMC Components
Terminal Setup
Operating Modes
Entering the RMC
SRM Environment Variables for
COM1
Status Monitoring
Remote Power (On/Off)
NOTE: In many ways the DS10 and DS10L systems are identical. This
manual uses DS10 systems for most illustrations and examples. Where
significant differences exist, an illustration or example of a DS10L is
presented separately.
Chapter 3
Remote Halt (In/Out
Configuring Remote Dial-In
Configuring Dial-Out Alert
Dialing In
Resetting the RMC to Factory
Defaults
Troubleshooting Tips
RMC Commands
Remote Management Console 3-1