Interpreting The Network Status Lights - Compaq d330 - Desktop PC Manual

Network Communications
✎
✎

Interpreting the Network Status Lights

1–4
3. Double-click Local Area Connection.
4. Click Properties.
5. Click Configure.
6. Click the Power Management tab, then select or clear the check
box to Allow this device to bring the computer out of standby.
Windows XP
1. Select Start > Control Panel.
2. Double-click Network Connections.
3. Double-click Local Area Connection.
4. Click Properties.
5. Click Configure.
6. Click the Power Management tab, then select or clear the check
box to Allow this device to bring the computer out of standby.
For more information on Wake-On-LAN, refer to the online Desktop
Management Guide or to the Remote Management Administrators
Guide. The Remote Management Administrators Guide is included
with the Remote Management Setup Utilities and is available on the
Support Software CD or at
For information on filtering out unintentional Wake-On-LAN events,
refer to any additional documentation provided for the NICs
advanced diagnostics/configuration utility.
Select Ethernet network interface controllers include network status
lights:
■
Link light—illuminates when the system is physically connected
to an active network.
■
Activity light—illuminates when the computer detects network
activity. When the system is connected to a highly used
network, the activity light will remain on almost constantly.
www.hp.com
http://www.compaq.com.
Network & Internet Communications Guide