Samsung DVD-C700 User Manual page 20

C
ontrolling a TV with the Remote
The remote can also be set up to control most TVs. To program the remote, use the code that corresponds to
your brand.
1
1
3
3
NOTE
The remote may not be able to control every model TV of the brands listed.
38
1. Turn on the TV.
1.
2. Point the DVD's remote at the TV.
2.
3. While holding the TV POWER button down,
3.
enter the code for your brand.
TV Codes
CODE BRAND CODE BRAND
0 SAMSUNG A OPEN/CLOSE MITSUBISHI
1 SHARP B AUDIO SAMSUNG B
SONY SUB TITLE
2 SAMSUNG C
3 MAGNAVOX DVD POWER SHARP A
4 SANYO A ANGLE ZENITH
LG B
5 TOP MENU LG C
6 RCA MENU DAEWOO
7 LG A RETURN SANYO B
TOSHIBA
8 REV SEARCH EMERSON
9 HITACHI REPEAT SHARP C
SETUP JVC FWD SEARCH SAMSUNG D
DISPLAY PANASONIC A BACK SKIP PANASONIC B
e.g For Samsung A TVs
While holding down the TV button, enter 0.
4. If the TV turns off, setup is complete.
4.
Enter other codes of the same brand if the first code does
not work.
5.
5. To operate the TV, use the "TV Function
Buttons" described on page 13.
T
roubleshooting Guide
Proper function of your DVD player is mostly dependent on the discs you play. When some of the functions
indicated in the I/B do not work properly, it is highly probable that the disc is responsible. We strongly
recommend you review the instruction book before you start using the player. For your convenience, we
have enlisted some tips to help solve problems you might encounter while using the DVD player.
However, if the same problem occurs repeatedly, please contact your nearest service center.
Problem
• Check the batteries in the remote. May need replacing.
• Operate the remote control at a distance of no more than 20 feet.
No operations can be
• Remove batteries and hold down one or more buttons for several min-
performed with remote.
utes to drain the microprocessor inside the remote to reset it. Reinstall
batteries and try remote again.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
Disc does not play
• This player cannot play CD-ROMs, DVD-ROMs, CD-R, etc. Insert a
DVD, a VIDEO-CD or a CD.
• 5.1 channel sound is reproduced only when the following conditions
are met. : 1)The DVD player is connected with the proper amplifier
5.1 channel sound is not 2)The disc is recorded with 5.1 channel sound.
being reproduced. • Check whether the disc being played has the "Dolby 5.1 ch" mark on
the outside.
• Check if your audio system is connected and working properly.
• The features or action cannot be completed at this time because:
1. The DVD's software restricts it.
The icon appears on 2. The DVD's software doesn't support the feature (e.g., angles).
screen.
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time that is out
of range.
Disc Menu doesn't appear. • Check if the disc has a Menu.
Playback mode differs
• Some of the functions selected in the Setup Menu may not work prop-
from the Setup Menu
erly if the disc is not encoded with the corresponding function.
selection
The screen ratio cannot be
• The Screen Ratio is fixed on your DVDs.
changed.
• Make sure you have selected the correct Digital Output in the Audio
No audio
Options Menu.
• With the power on, press and hold the STOP and PLAY/PAUSE button
on the player. This resets the password feature and all other settings to
Forgot parental level
the initial factory settings. You may be required to select a menu lan-
guage.
• Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow the
If you experience other
procedure once again.
problems.
• If the problem still cannot be solved, please contact your nearest
authorized service center or call 1-800-SAMSUNG.
Action I/B
P 13
P 7, 17, 18
P 7, 15,
35, 36
P 13,
P 21 ~ 30
P 26, 27
P 31 ~ 37
P 37
P 36
P34
39