Cabling Stacked Hp 1/10G Virtual Connect Ethernet Modules - Compaq BL10e - HP ProLiant - 512 MB RAM Update Manual

ISS Technology Update
breaker on the c-Class enclosure can not possibly kill all AC power inside the enclosure as it can not de-energize an upstream
power lead and its terminal connections. A local breaker could give an inattentive service person a false sense of security
regarding live power inside the enclosure. This is why our service procedures always instruct that power cords be unplugged
for certain potentially dangerous service events.
When local circuit breakers are used in a system design, they are there for reasons of safety and service. However, such circuit
breakers often see another practical application by the user: to hold the system in a power-down state at times such as physical
system installation. This particular field practice has prompted feedback concerning the lack of breakers on c-Class enclosures.
However, there is a simple procedure that will insure that an enclosure remains in a power-down state indefinitely.
Whenever the user wants the enclosure to remain in a power-down state, insure that all of the power supply modules are
disengaged from the connectors in the enclosure power slots. It is completely permissible to leave the power supplies in their
respective slots as long as they are "backed out" approximately one inch to disable the DC power sub-system.
When assembling a new system, a practical practice might be to slide the power supplies into the appropriate slots so that
packaging can be removed, but wait before fully seating the power supplies until all mechanical assembly work has been
completed and the user is ready to energize the system for deployment.
Additional resources
For additional information on the topics discussed in this article, visit the links in Table 4-1.
Table 4-1. Web resources
Resource Title
HP product HP BladeSystem
websites
Technology HP BladeSystem c-Class
briefs architecture
HP BladeSystem c7000
Enclosure technologies
Managing the HP BladeSystem
c-Class

Cabling stacked HP 1/10G Virtual Connect Ethernet Modules

The HP 1/10G Virtual Connect Ethernet Modules for c-Class BladeSystem can be stacked to optimize bandwidth and flexibility.
The stacked modules can be linked together on the back of the c-Class enclosure using the HP .5m 10GbE CX4 Cable (Part
Number 444477-B21).
When linking 1/10G Virtual Connect Ethernet modules in adjacent bays, the .5m 10GbE CX4 cable must be manually
manipulated so that the cable's bending radius does not exceed 4.0 inches at the connector and 1.5 inches away from the
connector.
URL
www.hp.com/go/blades
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c0
0810839/c00810839.pdf
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c0
0816246/c00816246.pdf
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c0
0814176/c00814176.pdf
Volume 6, Number 7
13