Compaq BL10e - HP ProLiant - 512 MB RAM Supported Configurations page 30

Workaround
Issue 7 The Microsoft IPMI driver will not install on HP ProLiant servers.
Description
Workaround
To work around this problem, use one of the following
methods:
Preferred method:
If the OEMPreinstall flag is set to Yes in the
UNATTEND.TXT file, set the "DisableVirtualOemDevices"
flag to Yes in the [UNATTENDED] section of the
UNATTEND.TXT file, as shown in the following example:
[UNATTENDED]
DisableVirtualOemDevices=Yes
Other methods:
Avoid setting the OEMPreinstall flag to Yes in the
UNATTEND.TXT file if files are not specified to be
preinstalled.
OR
Disable the virtual install disk in the advanced options of
the ROM-Based Setup Utility (RBSU) for the affected
server.
The Microsoft IPMI driver fails to load on HP ProLiant
servers. For additional information and a link to the hotfix
that resolves this issue, refer to Microsoft Knowledge Base
Article 912134
(http://support.microsoft.com/?kbid=912134).
Download and install the hotfix from Microsoft, as
instructed in Microsoft Knowledge Base Article 912134.
30