Linux Smp Support - Compaq AP750 - Professional - 256 MB RAM Installation And Configuration Manual

Red hat linux 5.2 installation and configuration on compaq professional ap and sp models
Hide thumbs Also See for AP750 - Professional - 256 MB RAM:
Table of Contents

Advertisement

10

Linux SMP Support

See the links referenced in the "Additional Resources" for more specifics. The Linux SMP
FAQ cites the following prerequisites to successfully enable SMP support on Linux:
"How do I make a Linux SMP kernel?"
The SMP FAQ is quoted below:
Uncomment the SMP=1 line in the main Makefile
(/usr/src/Linux/Makefile).
Enable "RTC support". Note that inserting RTC support
actually doesn't prevent drift, but ... it can prevent lockup
when the clock is read at boot time. A note ... says also
that activating the Enhanced RTC is necessary to get the
second CPU working (identified) on some original Intel
Mainboards.
Do NOT enable APM! APM and SMP are not compatible, and your
system will almost certainly ... crash under boot if APM is
enabled.
You must rebuild all your kernel and kernel modules when changing to and from SMP mode.
Remember to
make modules
Red Hat Linux 5.2 Installation and Configuration
and
make modules_install
.

Advertisement

Table of Contents
loading

Table of Contents