HP 500B - Microtower PC Maintenance And Service Manual page 25

13. To install a new expansion card, hold the card just above the expansion socket on the system
board then move the card toward the rear of the chassis so that the bottom of the bracket on the
card slides into the small slot on the chassis. Press the card straight down into the expansion socket
on the system board.
Figure 2-20 Installing an expansion card
NOTE: When installing an expansion card, press firmly on the card so that the whole connector
seats properly in the expansion card slot.
14. If you are replacing a graphics card, verify that the latch in the computer snaps back into place.
Figure 2-21 Replacing a graphics card
Expansion Cards 17