Pioneer DVR-810H-S User Manual page 15

Satellite only,
or cable with a box only:
Satellite & antenna,
or satellite & cable
without a box**:
** Setups with two
program sources like
®
these are only
available after you upgrade
to TiVo Plus. For more
information, visit
www.tivo.com/upgrade .
Satellite & cable with a box**:
1. Highlight "Satellite 2. Follow the directions
Box" and press SELECT. at the top of this page
(marked with *).
* Use the UP/DOWN arrows until the picture of the Recorder matches the
cable connection you used to connect your satellite or cable box. When the
video status below the picture says "Video OK," press SELECT to continue. If
the video status says "No Video," double-check that the video cable is
firmly connected to the Recorder and that you have selected the correct type
of video cable.
1. Use the UP/DOWN arrows
to highlight "Satellite Box"
and press SELECT.
3. Highlight "Cable Box"
and press SELECT.
C o m p l e t i n g G u i d e d S e t u p
2. Follow the directions at
the top of this page
(marked with *).
4. Follow the directions
at the top of this page
(marked with *).
1
3. Use the DOWN arrow to
highlight "Accept these
input settings" and press
SELECT.
5. Highlight "Accept
these input settings"
and press SELECT.
7