2-7
Installing an Optional CD-ROM Drive
Reference
Although the Compaq IDE CD-ROM drive is set for cable select, the IDE
Interface Cables included in this option kit do not support cable select. If you
must use one of these cables, use the table above to set the jumpers on the drive
to Device 1 (secondary/slave) or Device 0 (primary), as appropriate for your
system.
Table 2-3
Jumpers on a Compaq IDE CD-ROM Drive
Description
CS - Cable select for device 0 or
device 1
SL - Device 1 (Secondary/slave
device)
MA - Device 0
(Primary device)
IDE CD-ROM Drive for Servers and Workstations Installation and User Guide
Setting
Enabled, installed over both pins
Disabled, not installed
Disabled, not installed