Installing Windows Server 2008 Foundation - HP 124708-001 - ProLiant Cluster - 1850 Implementation Manual

Installing Windows Server 2008 Foundation

To install the Windows Server 2008 Foundation installation, complete the following steps:
Make sure that the server has a DVD drive (either native to the system or attached).
1.
NOTE
A license key may be required to use iLO virtual media with HP
ProLiant ML or HP ProLiant DL servers.
Place the Windows Server 2008 Foundation media into the DVD drive and boot the server to the
2.
DVD to begin the installation.
Follow the on-screen instructions to complete the installation.
3.
IMPORTANT
The F6 option for updating drivers is not available during the
Windows Server 2008 Foundation installation. If a boot
controller driver is not found, add the driver during the
installation by clicking the Update Driver button, and then
selecting the driver from the USB media, diskette drive, or CD-
ROM drive.