Table of Contents
Advertisement
•
cpqHoTrapFlags
•
cpqHoCriticalSoftwareUpdateData
Supporting SNMP Trap Description: "[cpqHoCriticalSoftwareUpdateData]"
Event identifier: cpqhsmsg.dll - 1792 (Hex)0x84350700 (Service Event)
Log Severity: Warning (2)
Log Message: The agent is unable to generate traps due to an error during initialization.
Event identifier: cpqhsmsg.dll - 1795 (Hex)0x84350703 (Service Event)
Log Severity: Warning (2)
Log Message: The agent is older than other components. The agent is older than the other
components of the Management Agents. Reinstall all of the Management Agents to correct this error.
Event identifier: cpqhsmsg.dll - 1796 (Hex)0x84350704 (Service Event)
Log Severity: Warning (2)
Log Message: The %1 Agent is older than other components. The %1 Agent is older than the other
components of the Management Agents. Reinstall all of the Management Agents to correct this error.
Event identifier: cpqhsmsg.dll - 1800 (Hex)0x84350708 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read security configuration information. SNMP sets have been disabled.
Event identifier: cpqhsmsg.dll - 1803 (Hex)0xc435070b (Service Event)
Log Severity: Error (3)
Log Message: Unable to load a required library. This error can be caused by a corrupt or missing
file. Reinstalling the Management Agents or running the Emergency Repair procedure may correct this
error.
Event identifier: cpqhsmsg.dll - 1806 (Hex)0x8435070e (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation SNMP Agent service is not running. The agent has determined that the
Foundation Agents service is not running. Stop the SNMP service and restart the Foundation Agents
service. If the error persists, reinstalling the Management Agents may correct this error.
Event identifier: cpqhsmsg.dll - 1808 (Hex)0x44350710 (Service Event)
Log Severity: Information (1)
Log Message: The agent could not deliver trap %1. The agent was unable to use Asynchronous
Management to deliver a trap. This can be caused by a failure in the Remote Access Service or by a
missing or invalid configuration. Use the Management Agents control panel to verify the
Asynchronous Management configuration settings. Use the Network control panel to verify the Remote
Access configuration. If this error persists, reinstalling the Management Agents or the Remote Access
Service may correct this error. For more information, see the Management Agents Asynchronous
Management documentation.
Event Identifiers 2048-2359
Event identifier: cpqhsmsg.dll - 2048 (Hex)0x84350800 (Service Event)
Foundation agents 17
Advertisement
Table of Contents
