2.10 Installing A Floppy Disk Drive - Asus Vintage User Manual

2.10 Installing a floppy disk drive

Refer to the instructions in this section to install a floppy disk drive (FDD).
To install a floppy drive:
1. Place the chassis upright.
2. Using a screwdriver, push the
knock down metal cover in and
out of the chassis until it is
removed.
3. Carefully insert the floppy disk
drive into the lower 3.5-inch
bay.
4. Push it inward until the FDD
screw holes align with the
holes on the bay as shown.
5. Secure the drive with two
screws.
A S U S V i n t a g e - S 8 0 0 A S U S V i n t a g e - S 8 0 0 A S U S V i n t a g e - S 8 0 0 A S U S V i n t a g e - S 8 0 0 A S U S V i n t a g e - S 8 0 0
F D D s c r e w h o l e s F D D s c r e w h o l e s F D D s c r e w h o l e s F D D s c r e w h o l e s F D D s c r e w h o l e s
F D D s c r e w s F D D s c r e w s F D D s c r e w s
F D D s c r e w s F D D s c r e w s
3 3 3 3 3
2 - 1 9 2 - 1 9 2 - 1 9 2 - 1 9 2 - 1 9