Table of Contents
Advertisement
4.4.8
Network Stack
Network Stack [Disable Link]
Enables or disables the network stack (Pxe and UEFI). Configuration options: [Disable Link]
[Enable]
4.5
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
EFI BIOS Utility - Advanced Mode
Main
CPU Temperature
MB Temperature
CPU Fan Speed
Chassis Fan 1 Speed
Chassis Fan 2 Speed
Power Fan Speed
CPU Q-Fan Control
Chassis Q-Fan Control
CPU Voltage
3.3V Voltage
5V Voltage
12V Voltage
4.5.1
CPU Temperature / MB Temperature [xxx�C/xxx�F]
The onboard hardware monitor automatically detects and displays the CPU and motherboard
temperatures. Select Ignore if you do not wish to display the detected temperatures.
4.5.2
CPU / Chassis / [N/A]
The onboard hardware monitor automatically detects and displays the CPU and chassis fan
speeds in rotations per minute (RPM). If the fan is not connected to the motherboard, the field
shows N/A. Select Ignore if you do not wish to display the detected speed.
4-20
Advanced
Monitor
Boot
CPU Temperature
+52ºC / +125ºF
+52ºC / +125ºF
+38ºC / +100ºF
2129 RPM
N/A
N/A
N/A
Enabled
Enabled
+1.168 V
+3.296 V
+5.080 V
+12.096 V
[xxx�C/xxx�F]
Exit
Tool
Chapter 4: BIOS setup
Advertisement
Table of Contents
