Asus T3-P5945GCX2 User Manual page 47

4. Serial ATA connectors (7-pin SATA1, SATA2, SATA3)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
When using the connectors in Standard IDE mode, connect the primary (boot)
hard disk drive to the SATA1/2 connector. Refer to the table below for the
recommended SATA hard disk drive connections.
Serial ATA hard disk drive connection
Connector
SATA1/2
SATA3
Connect the right-angle side
of SATA signal cable to SATA
device. Or you may connect the
right-angle side of SATA cable to
the onboard SATA port to avoid
mechanical conflict with huge
graphics cards.
ASUS T3-P5945GCX2
R
Color
Red
Red
SATA1 SATA2
GND GND
RSATA_RXN1 RSATA_RXN2
RSATA_RXP1 RSATA_RXP2
GND GND
RSATA_TXN1 RSATA_TXN2
RSATA_TXP1 RSATA_TXP2
GND GND
Setting
Master
Slave
right angle side
SATA3
GND
RSATA_RXN3
RSATA_RXP3
GND
RSATA_TXN3
RSATA_TXP3
GND
Use
Boot disk
Data Disk
4-7