Connectors - Asus S1-AT5NM10E User Manual

3.4

Connectors

1. Serial ATA connectors (7-pin SATA1, SATA2)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
and optical disk drives.
AT5I0N3L SATA connectors
Install the Windows
2. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN)
Connect the fan cables to the fan connectors on the motherboard, ensuring
that the black wire of each cable matches the ground pin of the connector.
AT5I0N3L fan connectors
DO NOT forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components. These are
not jumpers! DO NOT place jumper caps on the fan connectors!
ASUS S1-AT5NM10E
RSATA_TXP1
RSATA_TXN1
RSATA_RXP1
RSATA_RXN1
AT5I0N3L
RSATA_TXP2
RSATA_TXN2
RSATA_RXP2
RSATA_RXN2
XP Service Pack 2 or later version before using Serial ATA.
®
CPU_FAN
CHA_FAN
AT5I0N3L
SATA1
GND
GND
GND
SATA2
GND
GND
GND
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
3-5