Dimm Installation - Asus T2-P User Manual

Table 2: Memory frequency/CPU FSB synchronization
The system motherboard supports different memory frequencies
depending on the CPU FSB (Front Side Bus) and the type of DDR DIMM.
CPU FSB
800 MHz
533 MHz
400 MHz
*When using 800MHz CPU FSB, PC2700 DDR DIMMs may run only at
320MHz (not 333MHz) due to chipset limitation.

2.6.2 DIMM installation

To install a DDR DIMM.
1. Locate the two DIMM sockets
on the motherboard.
2. Unlock a socket by pressing
the retaining clips outward.
3. Align a DIMM on the socket
such that the notch on the
DIMM matches the break on
the socket.
4. Firmly insert the DIMM into
the socket until the retaining
clips snap back in place and
the DIMM is properly seated.
A DDR DIMM is keyed with a notch so that it fits in only one direction.
DO NOT force a DIMM into a socket to avoid damaging the DIMM!
ASUS Terminator 2 barebone system
DDR DIMM Type
PC3200/PC2700*/PC2100
PC2700/PC2100
PC2100
Memory Frequency
400/333*/266 MHz
333/266 MHz
266 MHz
Retaining clips
2
2
4
1
3
4
31