Primary Ide Master/Slave; Serial Ata Master - Asus Pundit-R User Manual

5.3.3 Primary IDE Master/Slave; Serial ATA Master

While entering Setup, BIOS auto-detects the presence of IDE/Serial ATA
devices. There is a separate sub-menu for each IDE/Serial ATA device.
Select a device item then press Enter to display the IDE/Serial ATA device
information.
Primary IDE Master
Device
Vendor
Size
LBA Mode
Block Mode
PIO Mode
Async DMA
Ultra DMA
SMART Monitoring: Supported
Type
LBA/Large Mode
Block (Multi-sector Transfer)
PIO Mode
DMA Mode
Smart Monitoring
32Bit Data Transfer
The values opposite the dimmed items (Device, Vendor, Size, LBA Mode,
Block Mode, PIO Mode, Async DMA, Ultra DMA, and SMART monitoring)
are auto-detected by BIOS and are not user-configurable. These items
show N/A if no IDE/Serial ATA device is installed in the system.
Type [Auto]
Selects the type of IDE drive. Setting to Auto allows automatic
selection of the appropriate IDE device type. Select CDROM if you
are specifically configuring a CD-ROM drive. Select ARMD (ATAPI
Removable Media Device) if your device is either a ZIP, LS-120, or
MO drive. Configuration options: [Not Installed] [Auto] [CDROM]
[ARMD]
LBA/Large Mode [Auto]
Enables or disables the LBA mode. Setting to Auto enables the LBA
mode if the device supports this mode, and if the device was not
previously formatted with LBA mode disabled.
Configuration options: [Disabled] [Auto]
Block (Multi-sector Transfer) [Auto]
Enables or disables data multi-sectors transfers. When set to Auto,
the data transfer from and to the device occurs multiple sectors at a
time if the device supports multi-sector transfer feature. When set to
Disabled, the data transfer from and to the device occurs one sector
at a time. Configuration options: [Disabled] [Auto]
80
: Hard Disk
: Maxtor 6Y080L0
: 81.9GB
: Supported
: 16 Sectors
: 4
: MultiWord DMA-2
: Ultra DMA-6
Select the type of
device connected to the
system.
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
Chapter 5: BIOS setup