Panasonic DMPBD10A - BD/DVD PLAYER Operating Instructions Manual page 10

Getting started
Connecting an amplifier/receiver (excluding HDMI connection)
F Connecting to an amplifier/receiver with 7.1ch/5.1ch AUDIO IN terminal
You can enjoy surround sound using the 7.1ch AUDIO OUT terminals. The 7.1ch AUDIO OUT terminals offer you another option for
enjoying surround sound.
Back of the unit
Manufactured
SURROUND
DIGITAL AUDIO
OUT
L
R
(PCM/BITSTREAM)
COAXIAL
SURROUND
BACK
L
R
OPTICAL SUBWOOFER CENTER
7.1ch AUDIO OUT
Cable connections
a Surround speaker (L/R)
b Surround back speaker (L/R)
(Not necessary when connecting to 5.1 channel AUDIO IN)
c Subwoofer
d Center speaker
e Front speaker (L/R)
G Connecting to an amplifier/receiver with DIGITAL AUDIO IN terminal
You can enjoy surround sound using the DIGITAL AUDIO OUT terminals. The DIGITAL AUDIO OUT terminals offer you another option for
enjoying surround sound.
With COAXIAL IN
Back of the unit
With OPTICAL IN
Back of the unit
RQT8997
10
11 Connection
COMPONENT
2ch AUDIO OUT
VIDEO OUT
R L
Y
Please connect
1 directly to TV.
VIDEO OUT
P
B
2
P
R
FRONT R /R FRONT L /L
S VIDEO
OUT
Coaxial cable
Manufactured
COMPONENT
2ch AUDIO OUT
VIDEO OUT
R L
SURROUND
Y
DIGITAL AUDIO
Please connect
OUT
L
R 1 directly to TV.
(PCM/BITSTREAM)
COAXIAL
VIDEO OUT
SURROUND
P
B
BACK
L
R
2
P
R
SUBWOOFER CENTER FRONT R /R FRONT L /L
OPTICAL
S VIDEO
7.1ch AUDIO OUT OUT
Optical digital
audio cable
Manufactured
COMPONENT
2ch AUDIO OUT
VIDEO OUT
R L
SURROUND
Y
DIGITAL AUDIO
Please connect
OUT
L
R 1 directly to TV.
(PCM/BITSTREAM)
COAXIAL
VIDEO OUT
SURROUND
P
B
BACK
L
R
2
P
R
SUBWOOFER CENTER FRONT R /R FRONT L /L
OPTICAL
S VIDEO
7.1ch AUDIO OUT OUT
Multi channel speakers
Connect Audio
cables to
terminals
corresponding to
the speakers you
have connected.
Amplifier/receiver with
7.1/5.1ch AUDIO IN
COAXIAL IN
Amplifier/receiver with a
built-in decoder or a
decoder-amplifier/
receiver combination
OPTICAL IN
Amplifier/receiver with a
built-in decoder or a
decoder-amplifier/
receiver combination
≥This unit comes equipped with a
Dolby Digital Plus, Dolby TrueHD
and DTS-HD decoder. When
§
NOTE
connected to a compatible
amplifier/receiver using the 7.1ch
AUDIO OUT terminals, you can
enjoy surround sound recorded
with Dolby Digital Plus, Dolby
TrueHD or DTS-HD.
This unit supports DTS-HD High
§
Resolution Audio, however it
does not support DTS-HD Master
Audio. DTS Digital Surround will
be used as an alternative.
≥This unit supports playback of
DVD-Video discs in surround
sound up to 5.1channels.
≥Depending on how the disc was
recorded, the audio may not be
output properly on the number of
channels desired.
NECESSARY SETTINGS
≥If the speaker setup cannot be
completed on the amplifier/
receiver, change multi channel
speaker settings by selecting
"Multi-channel" in "Speaker" of
"Connection" tab (➡ 23).
Only when this unit is
connected to an HDMI
compatible television (➡ 8,B)
≥From the Setup menu (➡ 23), set
"HDMI Audio Output" to "Off".
Otherwise, audio is output as two
channels only, and also output
from the television's speakers.
≥You cannot use DTS Digital
Surround decoders (➡ 29,
Glossary) incompatible with DVD.
NOTE
≥Even if using this connection,
output will be only 2 channels
when playing DVD-Audio.
To enjoy multi-channel surround
sound, use connections C (➡ 9)
or F (➡ above).
NECESSARY SETTINGS
≥Change the settings in "Digital
Audio Output" (➡ 22).
Only when this unit is
connected to an HDMI
compatible television (➡ 8,B)
≥From the Setup menu (➡ 23), set
"HDMI Audio Output" to "Off".
Otherwise, the sound may not be
output with the desired settings.