Communication Setup - Onkyo BD-SP309 Instruction Manual

VUDU Deactivate
You can deactivate your VUDU information on the
player.
`
Item
Yes, No

Communication Setup

This allows you to perform and/or change the
communication settings and select the type of
Internet connection from Cable. This setting is
required to use BD-LIVE functions, video on-
demand services (e-Contents), home networks and
software updates that connect to the Internet.
NOTE
• Make sure that the LAN cable is connected to
this player (see page 18).
• For manually performing the setting, the following
information of the connected router or modem is
required. Con¿ rm the information prior to the setting.
- IP address, netmask, gateway, DNS address
1. Press / to select "Settings", then press
or ENTER.
2. Press / to select "Communication Setup",
then press or ENTER.
3. Press / to select "Ethernet Setup", then
press or ENTER.
4. Press / to select "Change", then press
ENTER.
Current Ethernet setup info.
IP Address
Netmask
Gateway
DNS
• For initializing the current setting, select
"Initialize", then press ENTER.
5. For setting the IP address, press
select "Yes" or "No", then press ENTER.
: Auto Setup
: Auto Setup
: Auto Setup
: Auto Setup
Change
Initialize
/ to
Do you obtain the IP address
automatically?
Yes
IP Address
Netmask
Gateway
• If selecting "Yes": The IP address is
automatically obtained.
• If selecting "No": The IP address, netmask
and gateway are manually entered using the
screen for inputting characters. Regarding
each of the setup values, con¿ rm the
speci¿ cations of your broadband router.
6. Select "Next", then press ENTER.
• If selecting "Yes" in the step 5, go to the step 8.
7. Enter your DNS address.
Enter your DNS address.
Primary
Secondary
• The primary and secondary DNS addresses
are entered using the screen for inputting
characters. Regarding each of the setup
values, con¿ rm the speci¿ cations of your
broadband router.
8. Select "Next", then press ENTER.
9. For testing the connection to the Internet, after
con¿ rming the settings, press
"Test", then press ENTER.
• "Test" is available only when setting to obtain
the IP address automatically. "Test" cannot
be selected if the IP address has not been
obtained automatically.
Confirm the current setting.
IP Address
Netmask
Gateway
DNS Address
MAC Address
• As a result of the test, if the Internet connection
fails, enter the setup values manually.
10. Press / to select "Complete", then press
ENTER.
11. Press HOME or EXIT to return to the Home
screen.
• To perform other settings, press
RETURN.
No
Next
Next
/ to select
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
xxx xxx xxx xxx
: xx xx xx xx xx xx
Test
Complete
En
45