Function Explanation - Danby Premiere DDR7009REE Owner's Use And Care Manual

9
1) POWER Button: On / Off
2) FAN SPEED Button: High / Low
3) TIMER Button:
When unit is operating, press TIMER to set number
of hours desired until unit will shut off.
When unit is in stand-by, press TIMER to set number
of hours desired until unit will turn on.
Setting timer from 1-24 hours. To cancel the timer,
proceed as above but set the "timer off" to zero (0)
hours.
4) °C/°F Button: Press the °C/°F button to toggle
between Celsius and Fahrenheit.
5) Receiving Sensor

FUNCTION EXPLANATION

8 7
1 2 3
6
6) SET HUMIDITY/CURRENT HUMIDITY
DISPLAY: When machine is running, it displays the
current humidity. Press UP or DOWN buttons to
select humidity setting. The humidity is adjusted in
increments of 5% by each press. Adjustable range is
within 30%RH to 90%RH. 10 seconds after setting
humidity, the display will change back to the current
humidity.
7) CURRENT TEMP / TIMER SET DISPLAY:
When machine is running, it displays the current
temperature. Press the TIMER button to set the
machine to shut off automatically after specified
amount of time. 10 seconds after displaying the timer,
the display will change back to current temperauture.
8) DEFROST LIGHT: When temperature is low,
unit enters defrost mode and defrost light illuminates.
9) BUCKET FULL LIGHT: When water tank is
full, bucket full light illuminates.
6
5
4