Table of Contents
Advertisement
MSP-PH2400.O/M.QXD
9/11/02
INSTALLATION INSTRUCTIONS (CONTINUED)
Installation of the Rechargeable Battery
1
Remove the battery cover located on
the rear of the handset by sliding it
downward.
3
Plug the new battery into the
rechargeable battery plug and insert
the rechargeable battery into the
battery compartment.
Charging the Rechargeable Battery
It is recommended that the rechargeable battery be fully charged overnight prior to
initial use. The handset's rechargeable battery will be charged when it's on the
base's charge contacts; the CHARGE indicator will light and a beep will be heard
when it is placed in the base.
LOW BATTERY will light in the display when the battery power is low and needs
recharging.
NOTES:
•
Every few months, or when charging becomes abnormal, clean the contacts of
the handset and the base with a standard pencil eraser.
•
To maximize battery life, fully discharge the battery every month or two. To do
this, simply unplug the telephone line cord and press the TALK button until the
battery is discharged.
3:46 PM
Page 7
2
If replacing an old battery pack, unplug
the battery connector and remove it
from the battery compartment.
4
Put the battery cover back on by
sliding it upward until it clicks in place.
7
Advertisement
Table of Contents
