Morphy Richards HAND BLENDER SET Instructions Manual page 3

FP48952MEE-Rev1 26/4/06 4:17 pm Page 4
fl
fi
›
‹
¤
‡
⁄ ·
Your hand blender is designed to help you prepare
everything from soups to chocolate mousse, crush
ice quickly and chop a variety of food with minimal
effort.
The hand blender can be used with the measuring
beaker or a saucepan.
www.morphyrichards.com
4
Á
‰
Ê
Â
„
Ë
‚
Features
⁄ Blender leg
¤ Release button
‹ Blender body
› Turbo switch
fi On/off switch
fl 8 Speed control
‡ Whisk gearbox
· Whisk attachment
‚ Chopping bowl base
(also storage bowl lid)
„ Chopping bowl
‰ Chopping bowl operating lid
 Chopper blade
Ê Wall mounting bracket
Á Wall mounting screw and
wall plug x2
Ë Plastic Measuring beaker with
storage lid
Unpacking your hand Using the chopper
blender attachment
WARNING: Carefully unpack The chopper attachment can be
your hand blender, blades are used for meat, hard cheese, nuts,
very sharp. herbs, boiled eggs, dry bread etc.
Wash all parts before first use, see WARNING: Blades are very
cleaning instructions page 6. sharp.
1 Place the chopping bowl onto the
Assembling the
chopping bowl base. This will
prevent the jug from slipping C.
attachments
2 Fit the chopping blade into the
Insert by pushing the blending leg, chopping bowl D.
whisk gearbox or the chopping 3 Add food to be chopped.
bowl lid into the blender body, until 4 Place the chopping lid on top,
it clicks into place. making sure that it is correctly fitted
on the chopping blade E.
To remove the attachment press the 5 Place the blender body onto the top
release button. of the chopping bowl lid until it has
clicked into place.
6 Plug the blender into the mains
Using the hand blender socket and press the on/off switch,
holding the blender and jug firmly
WARNING: Make sure that the on the work surface.
hand blender is switched off Note: Your hand blender is not
and unplugged from the mains. suitable for grinding coffee beans.
1 Clean the blending attachment
before using it for the first time with When chopping meat ensure that all
a damp cloth. the bones have been removed,
2 Insert the blending leg into the main before adding to the bowl.
housing and click into place A.
3 The hand blender can now be
Using for Ice crushing
plugged in and is ready to use.
The blender leg is fitted with a
WARNING: Do not blend in the special blade suitable for crushing
chopping bowl or damage will ice. It can be used to crush ice
occur to the product. Use the cubes to produce fine ice for
plastic measuring beaker. cocktails, cold drinks etc.
4 Place the blending leg into the food 1 Place a maximum of 4 ice cubes in
to blend, select the required speed the plastic measuring beaker.
for your food on the speed control, 2 Press firmly down on the ice cubes
then press the on/off button B.
with the blender using a plunging
Release the on/off to stop blending. action until the ice cubes are fine
5 After use, unplug the blender and ice pieces.
remove the blending leg by pressing
the release button and pull gently
away.
6 Give the blending leg a rinse with
cold water. If the main body has
been splashed just give it a wipe
with a damp cloth.
WARNING: Your hand blender is
designed for intermittent use.
Do not use non-stop for more
than 1 minute. Allow to cool
down for a minimum of 5
minutes before further use.
www.morphyrichards.com
A
B
4 5
3 6
2 7
g
1 8
C
D
E
5