Advertisement
48954 Rev1
23/5/06
⁄
fl
4
11:32
Page 6
¤
fi
ELECTRICAL
REQUIREMENTS
Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must be
A.C. (Alternating Current).
If the socket outlets in your
home are not suitable for the
plug supplied with this
appliance, the plug should be
removed and the appropriate
one fitted.
Warning: The plug removed
from the mains lead, if
severed, must be destroyed
as a plug with bared flexible
cord is hazardous if
engaged into a live socket
outlet.
Should the fuse in the 13 amp
plug require changing, a 3 amp
BS1362 fuse must be fitted.
This appliance does not need to
be earthed. It is a double
insulated product.
www.morphyrichards.com
www.morphyrichards.com
‹
5
4
3
2
¤
1
0
‹
Turbo
›
Features
⁄ Release button
¤ Speed control slider
‹ Turbo switch
› Body
fi Sockets
fl Beaters
‡ Dough hooks
Assembly
WARNING: Make sure that
the mixer is switched off
and unplugged.
1
Choose beaters or dough
hooks.
•
Use beaters for mixing, beating,
whipping and creaming liquids
and mixtures.
•
Use dough hooks for kneading
dough.
2
Insert the stem of the beater or
dough hook into one of the
sockets in the body.
•
The dough hook with the
groove should go into the hole
with the sleeve on the mixer A.
3
Push and turn the beater or
dough hook until it locks into
place.
4
Repeat for the other beater or
hook.
Using your Hand
Mixer
1
Switch on by sliding the speed
slider to one of the positions 1
(lowest speed) to 5 (highest
speed).
‡
Advertisement
