Keep Warm - Morphy Richards FLAVOUR SAVOUR Instructions Manual

Hide thumbs Also See for FLAVOUR SAVOUR:
Table of Contents

Advertisement

48784 rev2_x 16/12/2010 16:55 Page 8
Between 8 and 10 hours
(low)
Between 6 and 8 hours
(medium)
Between 4 and 6 hours
(high)
If you wish to use Slow Cook
programme 1, press the 'Accept'
button „.
If you wish to use Slow Cook
programme 2, press the 'Function
/ Time' button · once (Slow Cook
icon 2 will appear), before
pressing the 'Accept' button „.
If you wish to use Slow Cook
programme 3, press the 'Function
/ Time' button · twice (Slow
Cook icon 3 will appear), before
pressing the 'Accept' button „.
The time will then stop flashing
and the base will beep for
approximately 2 seconds before
the cooking process begins and
the timer will then countdown to
zero.
Once you press the 'Accept'
button „, the Slow Cook icon Â
will stop flashing and just the time
will flash. (Please note that if you
have selected the 'Slow Cook
Function' by mistake, you can
return to the previous screen by
holding down the 'Function / Time'
button · for approximately 2
seconds)
You are then able to select the
amount of time you would like the
Slow Cook programme to run for.
Pressing the 'Function / Time'
button · allows you to cycle
through the times available.
When the time you want is
displayed, press the 'Accept'
button „.
The time will then stop flashing
and the base will beep for
approximately 2 seconds before
the cooking process begins. The
timer will then countdown to zero.
8
UK Helpline 0844 871 0960
If for any reason you need to
cancel the cooking process before
the timer has reached zero, hold
down the 'Accept' button ‰ for
approximately 3 seconds. The
base will beep, the cooking
process will stop and the screen
will return to the default display
H.
H

Keep Warm

At the end of the cooking process
the product will beep and
automatically switch to keep
warm. Keep warm lasts for up to
two hours and counts up from
H0:00 to H2:00. At the end of the
2 hours, the base will beep and
the display will show H which will
stay on the screen until the hot
plate reaches ambient temperature
o
C) I.
(approximately 40
I
The screen will then go blank.
Pressing any button will take you
back to the screen shown when
first turned on.
Please note that the Keep Warm
function can be stopped at any
time during the 2 hour period by
holding down the 'Accept' button
„ for approximately 2 seconds.
Replacement Parts 0844 873 0726
After cooking
Switch off at the mains socket and
unplug the unit.
Important: Ensure base unit is
cool before storing in the pan.
Cleaning and
Taking Care of
Your Flavour
Savour
• The pan and lid can be washed in
a dishwasher. Alternatively, you
may use hot, soapy water with a
non-abrasive scouring pad. Do not
use abrasive cleaners or
detergents.
• Do not immerse the power base in
water or any other liquids. To
clean, use a damp cloth and dry
thoroughly.
• Ensure the base of the pan, and
the hot plate surface are clean,
free from burnt-on food, and dry
before use. The outer base of the
pan can be cleaned with a metal
scouring pad if required, to
remove stubborn stains.
• When adding ingredients and
liquid to the cooking pot, avoid
over filling. If an over-spill does
occur that runs down into the
base, switch off and unplug from
the mains socket, remove the pan,
and allow the liquid to drain away
through the drain holes. Fully
clean away any excess food or
liquid that may have lodged in the
recess between the heater plate
and the metal reflector, wipe over
with a damp cloth, and dry
thoroughly before next use.
Ireland Helpline 1800 409 119

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents