Advertisement
47020 rev4_x 28/09/2010 11:41 Page 11
The hot water function can be used to make hot
drinks such as tea.
Select the hot water icon Ï by pressing and
1.
holding the Steam Button ˜, a beep sound will
be heard and the hot water icon will appear. M
The Standby Indicator È will rotate until the
2.
appropriate heat for the hot water has been
M
reached.
Place an empty jug under the Steam Nozzle „.
3.
Turn the Steam Control  slowly to MAX
4.
position.
5.
When the jug is full, slowly turn the Steam
Control back to the OFF position.
6.
Press the Standby button to exit the Hot Water
Function.
Note:
Move the Steam Nozzle/ Cappuccino accessory
with the black handle. L
Note:
Careful handling is needed when removing the
Steam Nozzle from a jug filled with hot water.
WARNING: Steam Nozzle is very hot!
To make hotter coffee and to warm your coffee
cups you may wish to preheat your machine.
This can be achieved by following the 'espresso
operation' by passing hot water through the
coffee maker but without using coffee.
Cups should be placed upside down on the
warming plate ¤. Please note that this may
take up to 20 minutes depending upon the type
of cup used.
The appliance will switch off automatically if it
has not been used for 1 hour. Press the Standby
button to restart the appliance.
For details of other Morphy Richards products, please see our website:
When the water in the Drip Tray is full, the Empty
Drip Tray Indicator ‚ will rise above the drip
tray grid. N
N
Remove the drip tray grid and drip tray ‡&·
1.
from the appliance and empty the spilt coffee
and water from the tray. O
O
2.
Clean the drip tray grid and drip tray by a damp
cloth or a damp sponge before replacing.
11
Advertisement
