Before First Use; Operating The Appliance - Morphy Richards 2 SLICE FUSION LONG SLOT TOASTER - REV 1 Instructions Manual

44234 rev1 16/3/07 14:10
4 4 U U K K H H e e l l p p l l i i n n e e 0 0 8 8 7 7 0 0 0 0 6 6 0 0 2 2 6 6 1 1 4 4
Page 6

BEFORE FIRST USE

Before using the toaster for the
first time operate the toaster
without bread.
Note: the bread carriage levers
¤ will not stay down unless the
toaster is plugged in and the
wall switch is on. Ventilate the
room during this period.
As with all new electric heating
elements, your toaster emits a
'new' smell when it is first
switched on. This is quite normal
and not a cause for concern.
OPERATING THE
APPLIANCE
Toasting
1 Select the desired level of
browning on the browning
control · marked 1 to 9. The
setting required will vary
according to the moisture
content and thickness of the
bread.
2 After selecting the desired level,
place your bread in the slots ⁄
and depress the bread carriage
lever downwards until it locks.
3 After the set time has been
reached the bread will pop up
automatically ready for removal
from the slots. The bread
carriage lever will have returned
to its upper position and the
heating element will have
switched off.
• If the bread in your toaster
becomes jammed disconnect
your toaster at the socket, allow
it to cool, then remove the
bread.
• When not in use, remove the
plug from the mains socket.
• Allow the toaster to cool fully
before putting away.
WARNING: Do not wrap the
cable around the main body
of the appliance during or
after use.
R R e e p p l l a a c c e e m m e e n n t t P P a a r r t t s s 0 0 8 8 7 7 0 0 1 1 6 6 7 7 6 6 6 6 4 4 5 5
Using the frozen
button
To toast frozen bread do not
adjust the browning control from
your normal preferred setting,
place the bread normally in the
bread slots, then depress the
bread carriage lever and press
the relevant frozen button fl.
The button will illuminate and
the toaster will operate for a
longer period.
Using the re-heat
button
If your toast has popped up and
gone cold, the toaster offers a
re-heat facility. To use, depress
the bread carriage lever and
press the reheat button fi. The
button will illuminate and the
toaster will operate for a short
period re-heating the bread.
Using the cancel
button
If you wish to interrupt the
toasting process, press the
appropriate cancel
button ‹.
Using the bun
warmer
Locate the bun warmer rack
lever „ and raise the bun
warmer rack ‰.
Place the buns or other items
onto the bun warming rack. Set
the browning control to the bun
warmer position 2. Depress
bread carriage lever ¤. Wait for
the toaster to switch off
automatically or press the
cancel button to switch the
toaster off before removing the
buns.
WARNING: Take care not to
touch the metal of the bun
warmer as it will be hot.
Do not put more than two buns
on the bun warmer at any one
time.
I I r r e e l l a a n n d d H H e e l l p p l l i i n n e e 1 1 8 8 0 0 0 0 4 4 0 0 9 9 1 1 1 1 9 9