Electrical Requirements - Morphy Richards 10 CUP FILTER COFFEE MAKER - REV 1 Manual

Hide thumbs Also See for 10 CUP FILTER COFFEE MAKER - REV 1:
Table of Contents

Advertisement

47039 rev1
7/2/06

Electrical requirements

Check that the voltage on the rating
plate of your appliance corresponds with
your house electricity supply which must be
A.C. (Alternating current).
For appliances with fitted plug.
If the socket outlets in your home are not
suitable for the plug supplied with this
appliance the plug should be removed and
the appropriate one fitted.
WARNING : The plug removed from
the mains lead, if severed, must be
destroyed as a plug with bared flexible
cord is hazardous if engaged into a
live socket outlet.
Features
Removable filter holder
Filter locating tab
Non drip valve
Digital LED display
Control panel buttons
with indicator lights
Hot plate
The first time you use your coffee maker
Before using your coffee maker for the first
time operate the coffee maker with water only.
8:45 AM
Page 3
Removable
permanent
mesh filter
Should the fuse in the 13 amp plug
require changing a 13 amp BS1362 fuse
must be fitted.
WARNING: This appliance must be
earthed.
WEEE
For electrical products sold within
the European Community.
At the end of the electrical products
useful life it should not be disposed of with
household waste.
Please recycle where facilities exist.
Check with your Local Authority or retailer
for recycling advice in your country.
Jug lid
3
Measuring spoon
Hinged reservoir
lid
Water level
indicator
Glass jug with
water level
indicator

Advertisement

Table of Contents
loading

This manual is also suitable for:

12 cup filter coffee maker - rev 2

Table of Contents