Seat Memory - BMW Z4 ROADSTER 2.5I-2003 Owner's Manual

After releasing the lever, move the seat
backwards or forwards slightly to ensure
that the latch engages securely
2 Height
Pull lever 2 and apply weight to or remove
weight from the seat as required
3 Backrest
Pull lever 3 and apply weight to or remove
weight from the backrest as required.
Head restraints
#
Adjustments
Height: pull or push.
In order to move to the lowest positions,
press button 1.
Adjust the head restraint so that its
center is approximately at the height
of your ears. Otherwise, there is a higher
risk of injury to the cervical vertebra in the
event of an accident.<
Removal
Pull the head restraint upward until it stops.
Press button 1 and remove the head
restraint.
30
Online Edition for Part-No. 01 41 0 156 897 - © 09/02 BMW AG
Installation
Insert the head restraint into the guides.
Power seat adjustment
1 Tilt angle
2
Backward/forward adjustment
3 Height
4 Backrest angle
The head restraints are adjusted manually.
Refer to preceding section.
Read and comply with the adjustment
instructions on page 29. Failure to
do so can result in diminished personal
safety.<

Seat memory*

You can store and recall three different
driver's seat positions.
To store
1. Ignition key position 1 or 2
2. Adjust seat to desired position
M
3. Press the EMORY button: the indica-
tor lamp in the button lights up