Automatic Transmission; Indicator Lamp For Automatic; Engine Electronics - BMW Z3 COUPE 2002 Owner's Manual

Indicator and warning lamps
22n

Automatic transmission

Because of a malfunction, the
automatic transmission shifts
only in the emergency program. Please
consult the nearest BMW center.
For additional information, refer to
page 64.
Brake pads
Have the brake pads checked.
For additional information, refer
to page 104.
Automatic Stability Control plus
Traction (ASC+T)/Dynamic
Stability Control (DSC)
Indicator lamp flashes:
The system is actively regulating drive
torque and braking force.
The indicator lamp stays lit:
ASC+T has been switched off with the
button or it is defective, or the DSC
has been switched off, ADB is
operational.
Please consult the nearest BMW center
in case of a malfunction.
For additional information, refer to
pages 73, 74.
*

Indicator lamp for Automatic

Stability Control plus Traction
(ASC+T)/Dynamic Stability
Control (DSC)
hydraulic system warning
lamp
The indicator lamps remain on:
*
The DSC and ADB/DBC have been
switched off with the button or there is
a system malfunction.
Please consult the nearest BMW
center.
For additional information, refer to
page 74.
*
Indicator and warning lamps for
Canadian models.
*
*
and brake tently, this indicates a fault in the emis-
sions-related electronic systems.
Although the vehicle remains opera-
tional, you should have the systems
checked by your BMW center at the
earliest possible opportunity.
For additional information, refer to
page 133.
can continue to drive with reduced
engine output or engine speed. Please
have the system inspected by your
BMW center.
Service Engine Soon
If the indicator lamp comes on
either continuously or intermit-
"Service Engine Soon" warning
lamp for Canadian models.

Engine electronics

There is a fault in the engine's
electronic control system. You
Online Edition for Part No. 01 41 0 156 441 - © 10/01 BMW AG