Table of Contents
Advertisement
Lamps and bulbs
Front fog lamps
*
H1 bulb, 55 watts
1. Unclip the plastic cover (on the
inside of the lamp) with a screwdriver
2. Loosen two screws, tilt the fog lamp
outward and remove it
3. Release the plastic cap on the back
of the fog lamp and remove it
4. Remove the plug
5. Detach the wire clamp
6. Replace the bulb
7. Install in the reverse order.
Z3 roadster
Tail lamp assembly – Z3 roadster
Tail lamp, side marker lamps:
5 watt bulbs
Remaining bulbs: 21 watt
1 Turn signal
indicator
yellow or white
2 Brake lamp
3 Backup lamp
4 Tail lamp, reflector
5 Side marker lamp
1. Open the quick-release fastener
(arrow) and remove the cover
2. Turn the corresponding bulb holder
to the left and remove it
3. Press gently while turning the defec-
tive bulb to the left. Remove the bulb
and replace it
red
4. Insert the bulb holder and turn to the
right as far as possible
white
5. Secure the cover.
red
red
Online Edition for Part No. 01 41 0 156 441 - © 10/01 BMW AG
139n
Z3 roadster
Advertisement
Table of Contents
