Clock; Computer - BMW Z3 COUPE 2001 Manual

Clock

You can correct the time by pressing
the buttons (arrows) with a sharp object
such as a ball-point pen.
Set the clock forward by pressing the
right button; set the clock back by
pressing the left button.

Computer

*
Mode selection
You can call up the computer data in
the display from ignition switch posi-
tion 1 with the turn indicator lever.
Press the button briefly to select the
next display mode.
In addition, you can display the time by
pressing the key.
With the key, the calculations for
average fuel consumption and speed
are reset and begin again.
Time
The display is provided at ignition key
position 1 and above. In ignition key
position 0, the time is displayed for
approx. 8 seconds by pressing the
key.
Following a power loss, the clock auto-
matically switches to the setting mode:
the colon flashes. Two dashes are
displayed for entering the hour.
Online Edition for Part No. 01 41 0 155 690 - © 09/00 BMW AG
69n