BMW Z3 COUPE 2001 Manual page 38

Manual convertible top, roadster
38n
5 Fold the release lever against the
convertible top frame.
In order to avoid subsequent
moisture damage, do not open
and store the convertible top when it is
wet (refer also to the chapter on vehicle
care).<
To mount the cover
The illustration depicts a representative
schematic of the fasteners for the
convertible cover.
To secure, press the outer ring of the
cover fastener onto the mating piece on
the vehicle (refer to the arrows).
The attachment points of the cover are
indicated by the four arrows in the illus-
tration.
1 Position the convertible cover on the
convertible top well and align the
upper portions of the fasteners with
the lower portions on the vehicle.
2 Lift the cover at the rear, reach
underneath it and engage the two
middle fasteners.
3 Attach the front fasteners.
Online Edition for Part No. 01 41 0 155 690 - © 09/00 BMW AG