Looking At The Motorcycle Mount; Installing The Battery; Install Your Navigator Iv In The Mount - BMW NAVIGATOR IV - REV A Manual

Looking at the Motorcycle
Mount
Touch the buttons on the left side of the
Navigator IV motorcycle mount to quickly
access software features. The motorcycle
mount must be connected to external power
for the buttons to function.
➊
➋
➌
➊ Touch to zoom in and out on the map.
➋
Touch to toggle through Map page, trip
computer, and media player. Hold to
open brightness settings.
➌
Touch to hear the current instruction.
("Turn left on Main St.," for example.)
Hold open volume settings.
BMW Motorrad Navigator IV Owner's Manual

Installing the Battery

1. Locate the lithium-ion battery that came in
the product box.
2. Slide the release key until the battery
cover on the back of the Navigator IV
pops up.
3. Locate the metal contacts on the end of
the lithium-ion battery.
4. Insert the battery so that the metal
contacts on the battery align with
the metal contacts inside the battery
compartment.
5. Replace the battery cover.
CauTion: Always keep the battery
installed when the Navigator IV is on.
Install Your Navigator IV in
the Mount
1. Fit the bottom of your Navigator IV into
the cradle.
2. Tilt the Navigator IV back until it snaps
into place and the release button is
completely flat.
Motorcycle
mount
Warning: This product contains a lithium-
ion battery. To prevent damage, remove the
unit from the vehicle when exiting or store it
out of direct sunlight.
Getting Started
E
N
Release button