Overview Of Functions - BMW K 1200 LT Operating Instructions Manual

Selecting a function
2
• Press knob 2.
» The function-selection mode
10
is active.
» The LEDs beside the l light
up.
• Turn knob 2 until the LED
beside the function you want
to select lights up.
» The current value of the
function appears in
display 1.
The communication sys-
tem returns to standby
ON if the knob is not moved for
5 seconds.c
Setting a function
• Press knob 2.
» The LED beside the function
you selected lights up.
» The 'function set' mode is
active.
• Turn knob 2 until the value
you want appears in
display 1.
• Press knob 2.
» The value you selected is
accepted.
» The function-selection mode
is active.
The communication sys-
tem returns to standby
ON if the knob is not moved for
5 seconds. If you do not press
the knob after turning it to a
value of your choice the com-
munication system returns to
standby ON, but note that the
new value is accepted even
though you did not press the
knob.c
The section entitled "Overview
of functions" ( 13) lists the
b
various functions and settings.
Restoring default
settings
• Press knob 1.
» The function-selection mode
is active.
• Turn knob 1 until the LED
beside g lights up.
• Press knob 1.
» The LED starts flashing.
• Hold knob 1 down for
5 seconds.