Table of Contents
Advertisement
4.
Replace the battery cover.
5.
If the battery is charged, your device turns on
and the confirm date and time dialog box
appears.
•
If the date and time are incorrect, click
Edit. See "Set the date and time" on
page 17 for more information.
•
If the date and time are correct, click OK.
Charge the battery
1.
Connect the small end of the USB cable to
your device.
2.
Depending on the type of travel charger that
you received with your device, you might
need to slide the plug blade attachment into
the power adapter or pull the plug blades
down.
PUSH
3.
Plug the power adapter into a power outlet.
6
4.
Charge the battery to full power.
Note: If you install the BlackBerry Desktop
Software on a computer, you can charge your
device by connecting it to that computer. See
"Can I charge my device by connecting it to my
computer?" on page 19 for more information.
Connect to the wireless network
On the device, if the power is off, press the Power
button. Your device should connect to the wireless
network automatically.
To connect to the wireless network successfully,
your wireless service must be active, and you must
be in a wireless network coverage area. See the
wireless network coverage chart on the inside
front cover of this guide for more information.
When your device is not connected to the wireless
network, you can continue to use features that do
not require a connection to the wireless network.
For example, you can type and save draft email
messages, manage tasks, or use the calculator.
Advertisement
Table of Contents
