Dell Inspiron One 0DTN4TA00 Setup Manual page 47

NOTE: If you see a message stating that no
diagnostics utility partition has been found,
run the Dell Diagnostics from the Drivers
and Utilities disc.
If PSA is invoked:
a. The PSA starts running tests.
b. If the PSA completes successfully, the
following message is displayed: "No
problems have been found
with this system so far.
Do you want to run the
remaining memory tests? This
will take about 30 minutes
or more. Do you want to
continue? (Recommended)."
c. If you are experiencing memory issues,
press <y>, else press <n>.
The following message is displayed:
"Booting Dell Diagnostic
Utility Partition. Press any
key to continue."
d. Press any key to go to the
Option window.
If PSA is not invoked:
Press any key to start the Dell Diagnostics from
the diagnostics utility partition on your hard
drive.
4.
5.
6.
7.
Choose An
Select the test you want to run.
If a problem is encountered during a test,
a message appears with an error code and
a description of the problem. Write down
the error code and problem description
and contact Dell (see "Contacting Dell" on
page 60).
NOTE: The Service Tag for your computer
is located at the top of each test screen.
The Service Tag helps you identify your
computer when you contact Dell.
When the tests are complete, close the test
screen to return to the Choose An Option
window.
To exit the Dell Diagnostics and to restart the
computer, click Exit.
Using Support Tools
45