Printer Problems - Dell Inspiron 9300 Owner's Manual

C H E C K T H E B A T T E R Y S T A T U S L I G H T
the battery charge is low or depleted. Connect the computer to an electrical outlet.
If the battery status light flashes green and orange, the battery is too hot to charge. Shut down the
computer, disconnect the computer from the electrical outlet, and then let the battery and computer
cool to room temperature.
If the battery status light rapidly flashes orange, the battery may be defective. Contact Dell. See
"Contacting Dell" on page 108.
C H E C K T H E B A T T E R Y T E M P E R A T U R E
will not start up.
T E S T T H E E L E C T R I C A L O U T L E T
device, such as a lamp.
C H E C K T H E
ensure that the light is on.
C O N N E C T T H E C O M P U T E R D I R E C T L Y T O A N E L E C T R I C A L O U T L E T
power strips, and the extension cable to verify that the computer turns on.
E L I M I N A T E P O S S I B L E I N T E R F E R E N C E
other appliances.
A D J U S T T H E P O W E R P R O P E R T I E S
in the Help and Support Center. To access help, see "Finding Information" on page 9.
E S E A T T H E M E M O R Y M O D U L E S
R
blank, reinstall the memory modules. See page 85.

Printer Problems

CAUTION:
Product Information Guide.
NOTE:
If you need technical assistance for your printer, contact the printer's manufacturer.
C H E C K T H E P R I N T E R D O C U M E N T A T I O N
troubleshooting information.
68
Solving Problems
— If the battery status light flashes orange or is a steady orange,
— If the battery temperature is below 0° C (32° F), the computer
— Ensure that the electrical outlet is working by testing it with another
A C A D A P T E R — Check the AC adapter cable connections. If the AC adapter has a light,
— See the Dell Inspiron Help file or search for the keyword standby
— If the computer power light turns on but the display remains
Before you begin any of the procedures in this section, follow the safety instructions in the
— Turn off nearby fans, fluorescent lights, halogen lamps, or
— See the printer documentation for setup and
— Bypass power protection devices,