Installing A Cd/Dvd Drive - Dell Dimension U7021 Owner's Manual

3 Press inward on the two tabs on the sides of the drive, and then slide the drive upward and
remove it from the drive bay.

Installing a CD/DVD Drive

1 If you are installing a new drive, unpack the drive and prepare it for installation.
Check the documentation that accompanied the drive to verify that the drive is configured
for your computer. If you are installing an IDE drive, configure the drive for the cable select
setting.
2 Connect the new drive to the set of rails that are attached to the inside of the cover. If a set of
rails is not attached inside the computer cover, call Dell (see page 131).
power cable
tabs (2)
data cable
CD/DVD drive
Removing and Installing Parts
99