External Power Supplies (Sold Separately); Changing The Compactflash Card - Minolta DIMAGE 5 Instruction Manual

BASIC OPERATION

EXTERNAL POWER SUPPLIES (SOLD SEPARATELY)

The AC Adaptor allows the camera to be powered from an electrical household outlet.
During periods of heavy use, the AC Adaptor can conserve battery power. Its use is
recommended when the camera is interfaced with a computer. AC Adaptor model AC-
1L is for use in North America, and AC-2L is for use in all other areas.
The External High-power Battery Pack Kit EBP-100 is a portable source of power for
the camera. This battery pack will significantly extend the operating time of the camera.
Do not change the power supply while the camera is on. Always turn off
the camera before changing between power supplies.

CHANGING THE COMPACTFLASH CARD

A CompactFlash card must be inserted for the camera to operate. If a card has not
been inserted, a "no-card" warning will automatically be displayed on the monitors. IBM
Microdrives are compatible with this camera. For recording media care and storage,
see page 143.
26
Remove the DC terminal cover by using the notch
on the right.
• The cover is attached to the body to prevent loss.
Always remove exhausted batteries before
connecting an external power supply!
Insert the mini plug of the AC adaptor or battery
pack into DC terminal.
Insert the AC adaptor plug into an electrical outlet.